top of page

Encontros Encante-se

Público·8 membros

Windows 8 Pro Sxs Folder Download [EXCLUSIVE]

Windows PCs can easily fill up with clutter that consumes valuable space, slowly affecting performance. The WinSxS folder is one location that holds many useless files that can be deleted to free up space on your computer. However, how do you go about it, and is it even safe to do so? This article will explain how to clean the Winsxs folder in Windows 10. Read on to learn.

windows 8 pro sxs folder download

WinSxS means side by side since the folder contains different file versions stored together. The WinSxS folder contains crucial components to help update and customize the operating system. So, it has the files involved in switching editions, recovering missing or damaged system files, adding or removing features, etc.

However, the WinSxS folder also stores older operating system versions to make it easier to roll back if need be. It does this with every system update, meaning it gets bigger over time. Deleting these files would help free up space on your machine

Sometimes a Windows 10 system starts misbehaving to the point where repair is needed. This often takes the form of worsening performance or stability, and can originate from damage to, loss of, or corruption of Windows system files typically found in the C:\Windows folder hierarchy. When that happens, users would be well advised to break out the following routine to help them set things back to rights.

A safer bet is to point DISM at a known good source for Windows image components on the local machine (or on your local network). This can be a Windows image (.wim) file or a compressed Windows image (.esd, which is used for electronic software downloads of Windows installations, as the file extension is meant to communicate). You can also point to a separate copy of a WinSXS folder (the usual directory path is C:\Windows\WinSXS) taken from another PC with similar or identical hardware for which dism ... /checkhealth returns a clean bill of health.

The syntax for image files is where things can get interesting. To point to the install.wim file that shows up in ISO downloads for the Windows 10 installer on a USB flash drive designated L:, for example, you must use the following source specification (which uses the first image it finds inside the .wim file, designated :1):

The sxs folder from Windows 6.1, 6.2 and 6.3 are not the same just like the OS is not the same. Yes in many cases the latest version has all the earlier stuff but not exactly the same. The .Net versions that shipped in 2009 with Windows 7 is nothing like those from 2013 with Server 2012 R2.

By the time Windows Vista was introduced, Microsoft had solved the problem by creating a new technology called componentization, which uses a folder called WinSxS, which allows the operating system to store and keep track of all kinds of operating system files, DLLs included, with the same name but different versions. (WinSxS is short for Windows Side-by-Side and refers to using files with the same name but with different version numbers at the same time in the operating system.)

While this is a pretty simplified description of the WinSxS folder, the general idea I want to convey here is that the WinSxS folder can grow so large that it takes up a good chunk of hard disk space. The problem gets compounded by the fact that the WinSxS folder is used to store so many files. This means that old files as well as files that are no longer necessary can still be taking up hard disk space.

For instance, Figure A shows the WinSxS folder properties dialog on a system that began as a Windows 7 system, which was upgraded to Windows 8.x and again to Windows 10. As you can see, the WinSxS folder on this system contains 60,209 files and takes up a grand total of 6.73 GB of hard disk space.

Error: 0x800f0906 The source files could not be downloaded. Use the "source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see =243077

There's lots of stuff on the internet on this and most of it was summarized in the answers here. We tried it all and none of it worked. Even when pointing at various copies of the sxs folder, it still would get a variation of the "source files not found" error.

Deep within the OS is a backup copy of the OneDrive installer. To find it, go to File Explorer > This PC and open the system drive where Windows 10 is installed (usually C:\). Next, open the Windows folder and then open the WinSxS folder. In the search box, type: onedrive then wait until the OneDriveSetup setup file appears.

These instructions apply to the desktop version of OneDrive. Microsoft also has a modern version of the OneDrive app for Windows 10 you can download from the Microsoft Store. In our previous article, we showed you how to set up and use the OneDrive universal app. If there is more you would like to know about OneDrive, remember to check out our series of articles for tips and tricks, whether you use Windows, Mac, Android, or iOS.

In this post, we will learn about the different steps to install .Net Framework 3.5 in windows 10. It is required in some functional requirement to run an app also for images that will support more than one language, you must add .NET Framework 3.5 binaries before adding any language packs. Dot NET Framework 3.5 is not included by default in Windows 10.

In Windows 7 and Windows 8/10, there is a new folder under C:\Windows called WinSxS, which basically stores dll and component files. It also stores older versions of all dll and component files and can grow to be quite large. In addition to that, a lot of space is taken up by the backup folder, which gets really big after you install a Service Pack, like SP 1 for Windows 7.

There is also another way to remove the backup files for SP1 in Windows 7 and make it permanent. Simply open up the Disk Cleanup utility, click on Clean Up System Files and then check the Service Pack Backup Files box. Also, be sure to check Windows Update Cleanup and Previous Windows installations if those options are present. The latter one will reduce the size of the entire Windows folder significantly.

Before I took the same steps on one of my servers, I used a free folder analysis tool called TreeSize Free to check my system drive to see how many spaces are occupied by this WinSxS folder, a total of 14GB.

Dism disk cleanup: Deployment Image Servicing and Management (DISM) is a command-line tool that allows you to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. The /Cleanup-Image parameter of dism.exe provides advanced users more options to further reduce the size of the WinSxS folder.

Windows Update files are downloaded to this folder and removed after successful installation. When you find yourself in a situation where your C: partition is rather small, and SoftwareDistribution folder eats up too much disk space, follow these steps to move the SoftwareDistribution folder to a different location.

Another way for you to gain some extra free space is to move the User Documents folder (and others, like Downloads), for instance from C:\Users\$USER$\Documents to D:\User\$USER$\Documents (substitute $USER$ with the username whose Documents folder you want to move). Here are the steps for you to follow (screenshots taken from Windows Server 2016 TP5):

Yes, the Windows component store (WinSxS folder) can become large, very large. But fortunately, Microsoft provides us the tools to monitor, manage and clean up the WinSxS folder to regain that used disk space.

Hi,Thank you for the article. Here is my little contribution.To see Windows Update Cleanup :copy \\$MACHINE\C$\Windows\System32\scavengeui.dll c:\windows\System32\copy \\$MACHINE\C$\Windows\System32\en-us\scavengeui.dll.mui c:\windows\system32\en-US\regsvr32 c:\windows\System32\scavengeui.dll

In Server 2012 R2, it appears that while cleanmgr runs after following your directions, it becomes almost useless, because after uninstalling the desktop experience you lose all the extended cleanup options such as previous windows installations, windows update cleanup etc and even temporary files cleanup. Some sort of system hook is missing that lets it scan these system areas.

The WinSXS folder is a system folder that contains all of the Windows components and grows enormous over time. For example, when installing Windows updates, it removes the new Windows component in the WinSXS folder and saves the old component in the WinSXS folder. That is, every time you update Windows, your WinSXS folder grows in size. This function can be useful in case of an incorrect update, but in reality, it is rarely used and generally takes up a lot of free space.

In Windows 8, this problem is solved - it's a new option that allows you to completely remove these unidentified components of WinSXS folders, freeing up space. To do this, open a Command Prompt window as administrator and use the following command to see the functions available to you:

The WinSXS folder contains the files required for legacy updates to work. Deleting files from it can damage other files and affect the operation of the entire operating system. To prevent data loss, use DiskInternals Partition Recovery.

If you want to recover this folder or other deleted files and subsequently export this data, just use the full recovery mode and forget about this problem forever. DiskInternals Partition Recovery is also a great way to open files as a file explorer in reader mode; this free feature helps you view the contents of a folder and files.

You can also activate the free disk imaging function before deleting the WinSXS folder and no longer be afraid to experiment. DiskInternals Partition Recovery is a professional application with thousands of positive results and experience in data recovery of any type and size for over 15 years. 350c69d7ab


Bem-vindo ao grupo! Você pode se conectar com outros membros...
Página do grupo: Groups_SingleGroup
bottom of page